Watched a DIY video of someone using Posca Pens on fabric to draw phenomenally beautiful designs and want to give it a try?
Can Posca Pens be used on fabric, or are they just a gimmick?
Well, the popularity of these amazing pens won’t fade anytime soon since they can be used on a variety of surfaces, and you can precisely draw almost any design.
In this article, you’ll find every detail you should know about using Posca Pens on fabric.
Moreover, I’ve explained a detailed way to ensure excellent results when using these amazing pens on a piece of fabric. Lastly, the biggest concern for most DIYers is that the ink washes away over time. But you can put a full stop to this problem by following the proper Posca Pen sealing process explained in the article.
Get your Posca pen ready while you read this article and perform the explained steps one after the other.
Can Posca Pen Be Used on Fabric?
The short answer is yes! You can use a Posca Pen on fabric without any issues. Below, I’ve listed the quick steps to use it like a pro. and you can do that following the step-by-step guide on how to use use Posca pen on fabric below.
I. Pin the Fabric Properly
Pin the fabric in place in order to ensure that it doesn’t move during the process. This will also help you achieve a cleaner, more precise design.
If you don’t have access to a clothesline or other piece of grid-like material, use pins to hold the fabric in place.
Next, you will need to sketch your design onto the fabric. You can use a ruler or straight edge here to draw the lines straight, or simply freehand it.
II. Dab the Posca Pens to Get Them Ready
Dab a Posca Pen on a white paper towel to remove any excess ink. Dip the pen into a cup of water and shake off the ink.
Place a small drop of water on the fabric and gently dab the area with the Posca Pens, from side to side.
IV. Trace the Design Precisely
The first step is to trace the design precisely. You should always start from the corner of the fabric. From there, the next steps will depend on whether you’re drawing a line or a solid shape.
It’s as easy as drawing a straight line. Just start from the corner, and follow the line as you go.
For a solid shape, start from the corner and work your way around the outline of your shape. You can always erase any mistakes as you go around the shape, and make any adjustments as needed.
V. Give the Fabric a Quick and Gentle Wash
First, you need to give the fabric a quick and gentle wash in cold water. Then, you need to dry it off with a clean towel. Hang the fabric up immediately to avoid any water stains.
After it’s completely dry, you can start drawing with your Posca Pen! Make sure to work slowly and patiently, and you can expect excellent results.
Make sure to work slowly and patiently, and you can expect excellent results.
When finished, give the fabric a gentle rub with a mug of water to remove any excess ink.
Lastly, gently dab the fabric with dish soap and warm water. Let it dry and enjoy your beautiful design!
How to Seal the Posca Pen on Fabric, so the Design Lasts Longer?
The biggest concern for most DIYers is that the ink washes away over time. But you can put a full stop to this problem by following the proper Posca Pen sealing process.
First, take a paper towel and apply a coat of fabric drying spray evenly over the surface of your fabric. Next, using a dry paper towel, dab a coat of Posca Ink over the entire fabric surface.
Then, use a dry paper towel to gently dab any excess Posca ink from the fabric. Finally, seal your design with an iron set to medium-high.
This process will seal your design and ensure that your Posca Pens last longer. It’ll also give you a beautiful design that will last for a long time.
Make sure to have a lot of paper towels on hand because you’ll be using them to do these three steps: applying the fabric drying spray, dabbing the ink onto the fabric, and dabbing away any excess ink.
Repeat these steps until you have covered the entire surface of your fabric with Posca Ink. After that, you can go back and draw more intricate designs on top of the first layer.
Tips on How to Clean the Posca Pen from a Piece of Fabric
If your fabric is white, you can use a pencil eraser to remove the ink. If the fabric is colored, a wet cloth will do the trick.
If you’re satisfied with the design you created and want to keep it for a long time, to keep the ink from rubbing off, use a cloth and some rubbing alcohol to seal the design.
If you don’t want to use rubbing alcohol, use a damp cloth and some white vinegar. Either way, make sure you dry the fabric as soon as possible after cleaning it.
Conclusion
The ink in Posca Pens is permanent and water-resistant, which means it will not wash away over time. And because the ink is rich in color, you can use a variety of colors to create complex, beautiful designs.
Because Posca Pens are easy to use and provide precise results, they’re a popular choice when it comes to DIY projects. You can use them on a variety of surfaces, from paper to fabric, and achieve excellent results.
In this article, we covered everything you should know about Posca Pens and how you can use them on fabric. I hope you found these tips helpful and that you will be able to use the information to create the best designs possible!
